高级检索

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
曹式敬, 宋林松, 黎剑波, 周杨锐. 自升式平台穿刺计算方法探讨[J]. 海洋石油, 2011, 31(1): 86-89. DOI: 10.3969/j.issn.1008-2336.2011.01.086
引用本文: 曹式敬, 宋林松, 黎剑波, 周杨锐. 自升式平台穿刺计算方法探讨[J]. 海洋石油, 2011, 31(1): 86-89. DOI: 10.3969/j.issn.1008-2336.2011.01.086
shu
Cao Shijing, Song Linsong, Li Jianbo, Zhou Yangrui. Discussion on punch-through calculation method of jackup[J]. Offshore oil, 2011, 31(1): 86-89. DOI: 10.3969/j.issn.1008-2336.2011.01.086
Citation: Cao Shijing, Song Linsong, Li Jianbo, Zhou Yangrui. Discussion on punch-through calculation method of jackup[J]. Offshore oil, 2011, 31(1): 86-89. DOI: 10.3969/j.issn.1008-2336.2011.01.086
shu

自升式平台穿刺计算方法探讨

Discussion on punch-through calculation method of jackup

    摘要
  • 摘要: 自升式平台的穿刺会对平台结构或桩腿造成不同程度的损伤,因此非常有必要对作业井位进行插桩穿刺安全性评估。在总结国内外穿刺计算方法的基础上,首先分析了接近穿刺状态下上覆砂层的抗剪切能力,对桩基承载力公式进行了修正;然后对穿刺安全系数进行了探讨,推荐了平台作业期处于台风季时采用的安全系数;最后提出了更完善的穿刺分析和作业流程,并以HYSY9××平台在某井位插桩计算为例验证了所提出的方法。

     

    Abstract: Jackup installation is often faced with potential punch-through problems, which could produce fatalities on the legs or jacking systems.Thus it is essential to perform installation safety assessment on site specifically before deployment.Based on research of punch-through calculation methods in home and abroad, investigations on shear force of the firm layer, ultimate bearing capacity and safety factor are discussed.An analysis flow chart for potential punch-through site is also proposed.Finally, this analysis method is illustrated with HYSY9××installation as an example.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回